1. <cite id="n89pw"></cite>
    2. <rt id="n89pw"><optgroup id="n89pw"><acronym id="n89pw"></acronym></optgroup></rt><ruby id="n89pw"><progress id="n89pw"></progress></ruby>

      產品中心PRODUCTS

        首頁 ? 產品中心 ? 油墨
      >

      油墨

      DX3443C ink

      Color: Black
      Capacity: 500ML
      Packaging specifications: 5 boxes of *4 =20 box / box
      Gas flavor: tasteless or a Book fragrance
      Storage conditions: do not put in direct sunlight
      Storage temperature: -5~40 degrees Celsius
      Operating temperature: 10~30 deg
      詳細描述

       

      Applicable models: #prosyjx{word-wrap:break-word; width:341px; display:block} RICOH DX-2430C/3442C

      The quality of the products is described and the standard factory:

      Comparison of the relevant indicators, indicators Figure 1 ink ink

      Index note:

      1: the internal resistance, viscosity of ink flow, are the most important indicators of stability and fluidity of ink. Ink viscosity is moderate, with the temperature changes little better. The viscosity is too high, too thick ink, liquidity is poor, prone to pull do not move; the viscosity is too low, the ink thin, easy to cause the rejection of ink, ink spill; our ink using original standard production, the use of smooth, even ink, not sticky ink detection needle, winter is not smoke without moving, summer days not to jilt ink, ink spill (recommended the use of the best at 15-30 ℃).

      2, fineness: ink particles and dispersion of the fine degree. The smaller the particle size, permeability, quick drying ink performance is better, printing more clear; the greater the ink fineness, rough, easily cause plugging, ink spill; at the same time reduce the service life of the machine. Ink to adopt the latest Japanese ink device, with vacuum emulsification technology, ensure the small enough fineness.

      3, environmental protection: as with the original ink, our ink is neutral, not corrosion drum; no aromatic solvents, non irritating smell; ink through the EU RoHS environmental protection standard, all without any physical damage to the operator and printing the user.

      4, stability: ink changes at different temperature (our test temperature: -20 ℃ - 60 ℃), the change magnitude of the major indexes. To test by experiment, ink to the high temperature of 60 DEG C for 24 hours, low temperature -20 ℃ for 24 hours for a cycle, 3 cycles of repetition, ink without change, good stability. We adhere to the same standards are taken to check for each batch of ink, to ensure the long-term to provide high-quality ink stability.

       

      在線客服
      • 客服一點擊咨詢
      所有免费的av网站